View the earlier version. Version 7.10

Data monitoring alarms can be created and mapped to data monitors to monitor the state of a specific receive location and/or send port during a particular point of time (say specific hour in the day or once in every 15 minutes and so on). Follow the steps as shown below to create a Data monitoring alarm:

  1. Follow the steps 1–8 as mentioned in Creating an alarm section. You need to select For Data Monitoring when choosing from the drop down.
  2. Turn on the 'Use this alarm for Data Monitor Alerts' switch to map the current alarm to a data monitor. Only when this option is selected, the 'Notify on Success as well' switch gets activated
    The Notify on Success as well switch is optional for Data monitoring, while the Use this alarm for Data Monitor Alerts option is mandatory
  3. Click OK to save the alarm information

Click the sliders to view the process of setting up the process monitoring alarm.

Once you have created the alarm, you can set up Data Monitoring by following the exact steps mentioned in this article. You can configure data monitoring for the following -

  1. Process Monitoring
  2. Message Box Data Monitoring
  3. Tracking Data Monitoring
  4. BAM Data Monitoring
  5. ESB Data Monitoring
  6. EDI Data Monitoring